Forgive my ignorance but are the inductors in microhenries such as 2W05 is 2.5 microhenries? What is the component in parellel to the crystal? Any suggestion for the transistor besides hfe > 10 at 150 Mhz? This is KI6UMT needing a fox hunt transponder. Thanks.
Inductors: all air wound, 5mm diameter. 2w, 4w, 5w - these are 2,4,5 turns.
Regarding component parallel to crystal - resistor 4,7k.
Re transistor - can't give recommendation (because I use old and rare russiand ones - I have a lot of them). Look for any Ic~100mA capable UHF transistor.
3 comments:
Forgive my ignorance but are the inductors in microhenries such as 2W05 is 2.5 microhenries?
What is the component in parellel to the crystal?
Any suggestion for the transistor besides hfe > 10 at 150 Mhz?
This is KI6UMT needing a fox hunt transponder. Thanks.
Greetings!
Excuse me for such a long delay....
Inductors: all air wound, 5mm diameter. 2w, 4w, 5w - these are 2,4,5 turns.
Regarding component parallel to crystal - resistor 4,7k.
Re transistor - can't give recommendation (because I use old and rare russiand ones - I have a lot of them). Look for any Ic~100mA capable UHF transistor.
Best 73! Klemens
Post a Comment